slackware 12 on inspiron 531
here is my current fps with slackware 12 (32 bit). this is with the 32 bit nvidia drivers installed. i also made heavy modifications to the kernel. i am using the the 2.6.29.2 kernel.
mike@darkstar:~$ glxgears
2236 frames in 5.0 seconds = 446.999 FPS
778 frames in 5.0 seconds = 155.473 FPS
776 frames in 5.0 seconds = 155.115 FPS
778 frames in 5.0 seconds = 155.458 FPS
777 frames in 5.0 seconds = 155.274 FPS
778 frames in 5.0 seconds = 155.532 FPS
777 frames in 5.0 seconds = 155.237 FPS
777 frames in 5.0 seconds = 155.381 FPS
777 frames in 5.0 seconds = 155.251 FPS
778 frames in 5.0 seconds = 155.481 FPS
776 frames in 5.0 seconds = 155.176 FPS
mike@darkstar:~$ glxinfo |grep irect
direct rendering: Yes
GL_EXT_direct_state_access, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
slackware 13 on inspiron 531
this is all on an almost vanilla install. i recompiled and changed the processor family to Opteron/Athlon64/Hammer/K8
fps glxinfo |grep irect returned nothing.
root@darkstar:/usr/local/src# glxgears
800 frames in 5.009 seconds = 159.713 FPS
116 frames in 5.014 seconds = 23.135 FPS
131 frames in 5.001 seconds = 26.195 FPS
116 frames in 5.014 seconds = 23.135 FPS
116 frames in 5.013 seconds = 23.140 FPS
116 frames in 5.031 seconds = 23.057 FPS
root@darkstar:/usr/local/src# lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
01:0a.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
01:0a.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
01:0a.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
i am going to follow Alien BOB’s wiki to enable multi lib.